It is currently March 28th, 2024, 12:52 pm

All times are UTC-04:00




Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next
Author Message
PostPosted: July 4th, 2012, 9:40 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
First up, since I'm planning to make it Post-GB2 ECTO-1, as based on the hybrid continuity of the Ghostbusters Omnibus Timeline, I need a few more decals. I need at least one more GB1 logo, since the kit only includes the three appropriate to the original ECTO-1 (It's got four GB2 logos, which is right, but that doesn't really help much).

So I took a scan of the decal sheet, and made a copy of the GB1 logo.

I also did some work on the license plates. I'm considering some methods of making the plates removeable and interchangeable using magnets, so I actually made three sets of plates:

--ECTO-1 plates basically by photoshopping the ECTO-1A plates. This would be accurate from 1989-~2000, including EGB

Some images from Wikipedia helped with the other two sets

--ECTO-1 plates appropriate to ~2000-~2010

--ECTO-1 plates appropriate from ~2011-Present

I put one extra of each of the four designs on, just in case, meaning two GB`1 logos and 3 each of the plates:

Image

I've tried printing those up on decal paper, but I'm having some problems getting the settings right. I'll let you know when I get it to work. The 1990s plates are usable, and the 2000s in a pinch, but the logos are sloppy and the 2010+ plates look like mud.

So, I mentioned in another thread I realized Minimates scale pretty well with the 1/25 models. Behold:

The Ghostbusters and the classic original ECTO-1 (in GBOT terms, late 1983-1986), the Polar Lights kit from 2002.
Image

(Yeah, I never said I had access to a really good digital camera)

A bit of fun with the Minimates. Venkman's being Slimed and Egon and Janine are making out in the background
Image


The Ghostbusters and the ECTO-1A, probably just as they arrived at Liberty Island, December 31, 1988. Venkman: "I wonder if she's naked under that toga". The ECTO-1A is the AMT one I bought and made in 1990, when I had no patience and practically slopped it together.

(I bought a set of GB2 movie Minimates with the Slime Blowers for Ray and Winston. Also gives me a set of work gloves for all four, and a Giga Meter for Egon)
Image

Now...on to the Round 2 repop:

Here we see the Minimates trying out the interior. (Obviously, I haven't painted the interior yet) The front seat works pretty darn well. The back seat is a little more cramped.
Image
Image

The Minimates inside the test fit of the main body and the interior. The backseat figures had to have their lower halves removed to fit into the car. Fortunately, being Minimates, that's easy to do.

I'm considering not gluing the body, interior, and chassis together just so I can take it apart and take the Minimates in and out. We'll see how feasible that is as the project advances.
Image
Image

This is a little trick I learned from Star Trek modellers: use a dark color, like black or (in this case) Gunship Grey to line the interiors of the pieces. These are parts that won't actually be seen when the model is assembled, which makes it feel weird to do at first, but it blocks light and minimizes the translucence of the plastic. It gives it more of a solid, less toy-like look. (But since it won't be seen, it doesn't have to be a totally perfect, pretty paint job either)
Image

The bottom of the chassis, painted Rust. This is one of the options from the instructions; I'm gonna try that one. If I don't like the results in the end, I'll just paint it flat black like I did the earlier two models.
Image

_________________
Image


Top
   
PostPosted: July 17th, 2012, 9:11 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
No, haven't forgotten about this. Some updates:

Painted the fuel tank (at least I assume it's the fuel tank) on the bottom of the chassis. I came up with this color combination on accident while doing a Star Trek model; it's acrylic silver over flat black, and recently used it deliberately on the treads of a Space Shuttle Mobile Launch Platform, and liked the results so I used it again here. Acrylic metallics really aren't very good, but the "wateriness" actually works well over the flat black to create a sort of "used steel" appearance.

Image
Image

Yeah, I know, maybe I'll stop sticking Minimates in the shots, but maybe I won't.

The main body has been painted Gloss White. I know it feels weird to paint white plastic with white paint, but there's two very good reasons:

1. Gloss paint is best for decal application
2. If you mess up, it's easier to cover the error. You make an error on bare plastic, and then cover it with paint, it's more obvious.

Image

It really doesn't show up well in the pictures, but the windows and the hood details have been detailed with Chrome paint (Testors#1790), with the help of a Micro Brush (on sale at most hobby stores in a variety of sizes). I stick with acrylics as much as possible, but as mentioned above, acryllic metallics aren't very good in my experience. Thus, for things like chrome, gold, aluminum, and copper, enamels are necessary.

Image

The inside roof. Black as far as I can tell from the photos on this site, and it matches the upholstery.

Image

Also painted the floor of the back section of the interior. I tried Gunship Grey first, but decided it was too dark--painted it over with Neutral Grey, which works better. Next step will be painting much of the interior flat black
Image
Image

Success with the decal printing, more or less. I did it twice just to be sure. There's still some smudging on the GB logo, and the 2010+ plates never came out usable, but everything else is close enough I'm going to go with it. I may replace the 2010+ plates with the 1984 plates from the kit; they're both orange, and only someone who lives in New York or a real nerd would know the difference.

Part of the secret of success was a tip from Captain Cyan, to up the dpi count, so thanks for that. It also helped to toggle the settings and tell the printer to not print it high speed; I think the rapid movement of the print heads back and forth may have contributed to the smudging.
Image

Important safety tip: put these decals in a safe place for a few days to let them dry. Otherwise, as Egon would say, it would be bad.

_________________
Image


Top
   
PostPosted: July 26th, 2012, 9:31 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
Progress to the interior:
Image
You can almost see in these bad pictures how I painted part of the seat semi-gloss and part of it flat to give it a look of different materials present
Image
Image
Image

The monitor screen and steering wheel:
Image

The dashboard. I still need to add the steering wheel, CB radio, and the radar scanner. I like the look of the dashboard without the last two items, though; if I ever do a build of the GBWC's ECTO-1N, I'll probably leave them off. But since this is ECTO-1, they'll go on their before the interior is finalized.
Image

Put together the wheels and the chassis. I know this is far "later" according to the instructions, but I don't think I've built a model in the exact instruction order in my life :lol:
Image

Okay, time for some more Minimate fun. Test fit the chassis, the interior bucket, and the body shell, and it reminded me a little of the "I found the car!" scene in GB1.
Image
November 1988
Ray: Louis and I found the new car, Peter!
Louis: Only sixty-eight hundred! With five years of inflation since you bought the first one, that's pretty good!
Venkman: ..somebody shoot me...

_________________
Image


Top
   
PostPosted: July 28th, 2012, 8:43 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
The complete dashboard
Image

The complete interior bucket, with the dashboard and the computer monitor installed. The monitor is pretty tight without gluing, so I left it unglued. I like being able to reangle it if I so chose, even though I probably won't
Image
Image

I really wish I had a better camera. I pleased myself inordinately with some of the details on the dashboard, computer keyboard, and control panels in the back. They don't show up real well in these pictures (The look like stills from a low rez flash video because they sorta are--it's a cheap camera/camcorder)
Image
Image
Image
Image

And because it's what I've been doing the entire build, a shot of the Minimates trying out the interior.
Image

_________________
Image


Top
   
PostPosted: July 29th, 2012, 8:28 pm 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
Not a huge update, but I'm excited and want to share:

Image

This is the GB logo I scanned and printed on decal paper. After letting it dry for days, and spraying it twice with decal bonder, I finally cut it out, dipped it in water, and slid it into place.

In hindsight, I should have cut slightly closer to the image, but I was afraid of cutting anything off. It's white against a white background, fortunately. The whole reason I put the 'extra" decal on the back door was because it would be the one of the four seen the least in all probability.

Thanks once more to CaptCyan of GBFans for his advice on decal printing. It helped a lot.

_________________
Image


Top
   
PostPosted: August 3rd, 2012, 9:31 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
The red paint to the main body shell, and the fins.

Image
Image
Image
Image

And the fins complete and glued to the ECTO-1

Image
Image

I've started some paint work on the roof rack, but at the moment it's all white paint on white plastic, so that's not really worth taking pictures of.

Actually, the next step I'm probably making is finishing the decaling of the main body shell. Definitely the caution stripes and the GB1 logos. I may not use the advertising stuff, though. I left them off of my own previous artistic depictions of the post-GB2 ECTO-1, after all, though leaving them on would make it look a little closer to the IDW version.

_________________
Image


Top
   
PostPosted: August 8th, 2012, 9:16 am 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
Main body shell decals done:

The hood, sporting one of the kit provided GB1 logos (which normally would have gone on the tailgate):
Image

The sides:
Image
Image

I decided to go ahead and add the various advertising stuff. It just seemed a bit bare without it, and adds to the verisimilitude that it's the same car as the ECTO-1A with just the logos on the three doors and the hood changed.

_________________
Image


Top
   
PostPosted: August 8th, 2012, 10:57 pm 
Offline
I Have No Life
I Have No Life
User avatar

Joined: August 24th, 2007, 2:20 pm
Posts: 811
Zodiac: Gemini
wo looks really good.

_________________
Image

Image

pleas parden my speling but I'm a littel dislexik and can't tipe whel


Top
   
PostPosted: August 21st, 2012, 9:16 pm 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
Been a little distracted due to GenCon and other stuff, but while progress has been slow, it hasn't stopped completely:

Image
As you can see, Ray and Winston have been working on some of the various components of the roof rack while Venkman's been goofing off.

_________________
Image


Top
   
PostPosted: August 29th, 2012, 8:21 pm 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
Two days to the GBFans contest deadline. I know I ain't gonna win shit, but I want to get it in anyway...

So a few days of progress right here:

Image

Image

Image

Image

The license plates I made. Because some of the plates didn't come out on the decal paper, I printed off another set on paper and laminated them. I'm attaching these to the car with rubber cement; that way, in theory, if I want to peel these off and switch in the 2000s or 2010s plates, I can, but chances are I probably won't. I just like having the option.

Image

Dry test of the main assembly. I really don't have a way I like of tinting the windows, so they'll probably be clear. It would match my old ECTO-1A that way anyway.

Image

Image

Image

Image

_________________
Image


Top
   
PostPosted: August 30th, 2012, 1:45 pm 
Offline
I Have No Life
I Have No Life
User avatar

Joined: August 24th, 2007, 2:20 pm
Posts: 811
Zodiac: Gemini
look really cool man.

_________________
Image

Image

pleas parden my speling but I'm a littel dislexik and can't tipe whel


Top
   
PostPosted: August 31st, 2012, 4:11 pm 
Offline
Doberman
Doberman
User avatar

Joined: August 30th, 2011, 6:30 am
Posts: 84
Location: Jackson, GA
Zodiac: Aries
Nice job. It looks great!

_________________
Exley K. Spengler

Sometimes in my job I feel just like Janine, over worked and under paid!


Top
   
PostPosted: September 1st, 2012, 10:34 am 
Offline
I Have No Life
I Have No Life
User avatar

Joined: February 20th, 2008, 6:48 pm
Posts: 461
Location: marooned on a small island.
Zodiac: Aquarius
This looks fantastic. I love the little details and the accuracy of it. I haven't got the patience to build something like this, but I really admire those who can.

_________________
"Welcome to Britain. We have prevailing south-westerly winds and 52% of our days are overcast so as a nation we are infused with a subtle melancholy -- leading to eccentricity, binge drinking and casual violence." - Bill Bailey.


Top
   
PostPosted: September 3rd, 2012, 8:38 pm 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
nikki wrote:
This looks fantastic. I love the little details and the accuracy of it. I haven't got the patience to build something like this, but I really admire those who can.


Compared to some of the builds on GBFans, it's sloppy hackwork. But it's still turning out a ton better than the ECTO-1A I built in 1990. :)

Getting very close now.

Egon inspects the completed roof carrier:

Image

Image

And now it's installed onto the main body:

Image

_________________
Image


Top
   
PostPosted: September 10th, 2012, 9:45 pm 
Offline
Administrator
Administrator
User avatar

Joined: July 26th, 2007, 5:15 pm
Posts: 3693
Location: Indianapolis
Zodiac: Taurus
The sign boards installed, showing one side with the red "Ghostbusters" display, the other the green "Ghostbusters" display.
Image
Image

I didn't use the "We're Back" decals because this build represents the ECTO-1 after the post-GB2 newness wears off. Though as I write this I realize they could have used the blurb in 1997 after the Extreme Ghostbusters form.

This is also one area I botched on the original build in 1990. I slopped it together and the panels ended up glued into the signboards. This time I did it slow and got it right.

Image

That's actually the reverse side of one of the other panels, painted black. This would simulate the signboards being turned off.

Now, I discovered a little problem last week. I don't know how or when, but part 113, the "braided hose", is missing from my kit. I don't know if it's a factory defect, or it came off the sprue some time and I didn't notice, but it's not there. I know I never removed it.

Fortunately, this ended up being a really easy fix. Some bead wire from the Hobby Lobby and presto:

Image

It lacks some of the little detail work of the kit part, but it's there and works great. I was even able to shape it to what might be a more "natural" lay than the kit part.

More soon. Just a couple of little parts to go.

_________________
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next

All times are UTC-04:00


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron

EctoGreen © 2008, 2014 Fritz Baugh

Imageset from ClassyDark by ayasha : ASDesignz Themes : Black-Fusion.com © 2007
Powered by phpBB® Forum Software © phpBB Limited